Original Fireplace Doors
The Original Standard features the ultimate in customization and standard sizes that will cover a wide range of openings in a package that ships to you much quicker than custom sizes.
Frame Material 14 Gauge Steel
Formed Steel Frame Panel Width 2”
Standard Frame Depth 3/4”
Classic Design • Frame Allows For Maximum Overlap And Coverage for Rough Stone or Damaged Brick
Overall Door Dimensions Based On Selection;
29"w - 33"w = Finished Width Of 34"
33"w - 37"w + Finished Width Of 38"
37"w - 41"w + Finished Width Of 42"
21.5"h - 23.5"h = Finished Height of 24"
23.5"h - 25.5"h = Finished Height of 26"
25.5"h - 27.5"h = Finished Height of 28"
27.5"h - 29.5"h = Finished Height of 30"
29.5"h - 31.5"h = Finished Height of 32"
Additional Customer Sizes Are Available.
Standard Mounting Hardware And Fiber Insulation Are Included
What is a masonry fireplace?
Masonry fireplaces take many forms, from brick and stone to marble and modern glass designs. These types of fireplaces require an external chimney for the smoke to escape but often allow outside air to enter the home.
Can I put glass doors on my masonry fireplace?
Yes—and you most definitely should! Not only are they energy efficient, but a custom-designed fireplace door can also enhance or refresh the look of your masonry fireplace. {Bonus: it also hides the mess of ashes and soot}
What if my fireplace is a custom shape?
You need a custom fireplace door.
What is pyro-ceramic glass?
Pyro-ceramic glass is a high-temperature glass that is rated for well above 1000 degrees, allowing you to burn your fireplace with the doors closed. This glass option is only available for masonry fireplaces. It's recommended to add the door damper assembly if you are planning to burn your fireplace with the doors closed.
Warrantied Products: Fireplace Doors, Heating Solutions, Freestanding Screens, Hanging Mesh
Kits, Toolsets, Hearth Centers, Log Rings & Holders, Firepits, Wood Racks, and Fireplace Hoods.
Stoll Industries hereby warrants these products to be free from defects in materials and/or
workmanship, for the period of time and under the conditions described in each section below,
subject to the limitations listed below (see section 2).
1. Limited Warranties
1a. Stoll Industries warrants the metal/steel materials and the applied finish of this product,
to be free from defects in materials and/or workmanship, for a period of five (5) years, subject
to the limitations outlined below (see section 2). Color finishes may vary slightly in shade
and are not guaranteed to perfectly match or coordinate. Finishes deemed to be significantly
varied may be re-finished solely at Stoll Industries option and discretion.
1b. Stoll Industries warrants any glass materials of this product to be free from defects in
materials and/or workmanship, for a period of one (1) year, subject to the limitations outlined
below (see section 2).
1c. Stoll Industries warrants any electrical components of this product to be free from
defects in materials and/or workmanship, for a period of one (1) year, subject to the following
limitations, and those outlined below (see section 2). Exposing this product to flames and/or
heat without engaging the blower unit will void your warranty.
2. Limitations
2a. The repair or replacement of parts, or the performance of service under this warranty,
does not extend the life of this warranty beyond its original expiration date.
2b. This warranty is non-transferable and is offered exclusively for the benefit of the
original purchaser, beginning on the original date of retail sale.
2c. Stoll Industries does not warrant this product against the following:
1. Damage occurring during transportation or installation, damage resulting from
improper installation, accident, alteration, or mis-use.
2. Discoloration of finish, distortion of metal parts, and or/glass breakage due to high
heat.
2d. Stoll Industries is not responsible for any additional charges that may occur during the
warranty process, nor are they responsible for any travel, labor, or installation expenses.
3. Warranty Process
If, during the given warranty periods, a product covered under this warranty proves to be
defective in material or workmanship, a claim for warranty service should be made through
your authorized Stoll Industries Dealer. Proof of purchase will be required. The authorized
dealer will contact Stoll Industries to procure replacement parts and/or if additional service is
deemed necessary. Stoll Industries reserves the right to choose at its option, the best method
of repair or replacement, for any warrantied part or product.
- Production Lead Time:
- Usually Ships Within 3-4 Weeks
